Digital component hookups, Required cords, Black – Sony STR-DE725 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Digital Component Hookups
r
3
3
r
3
3
Connect the digital output jacks of your DVD player to
the receiver's digital input jacks to bring the multi channel
surround sound of a movie theater into your home. To
enjoy full effect of multi channel surround sound, five
speakers (two front speakers, two rear speakers,«nd a
center speaker) and a subwoofer are required. You can
also connect an LD player with an RF OUT jack via an RF
demodulator, like the Sony MOD-RFl (not supplied).
Required cords
Optical digital cords (not suppiied)
Black ■dlTfan-,
Black
Audio/video cords (not supplied)
When connecting a cord, be sure to match the color-coded pins to
the appropriate Jacks on the components.
Yellow (video)
White (L/audio)
Red (R/audio)
Yellow (video)
White (L/audio)
Red (R/audio)
Example of LO player connected via an № demodulator
Please note that you cannot connect an LD player's AC-3 RF OUT jack directly to this unit's digital input jacks. You must
first convert the RF signal to an optical digital signal. Connect the LD player to the RF demodulator, then connect the RF
demodulator's optical digital output to this unit's OPTICAL DVD/LD IN jack. Refer to the Instruction manual supplied
with your RF Demodulator for details on AC-3 RF hookups.
Note
When making connections as shown above, be sure to set INPUT MODE ([3] on page 21) manually. This unit may not operate correctly if
INPUT MODE is set to 'AUTO."
8