Sony PLM-S700 User Manual
K glasstron, Glasstron, Plm-s700
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3-862-917-11 (1)
Glasstron
operating Instructions
Mode d'emploi
к
GI
WARNING
YOUR FAILURE TO FOLLOW THESE OPERATING INSTRUCTIONS MAY RESULT IN EYE
FATIGUE, EYE DAMAGE, OR OTHER INJURY.
CAREFULLY READ THIS INSTRUCTION MANUAL AND BECOME FAMILIAR WITH ALL
SAFETY INSTRUCTIONS FOR THIS PRODUCT.
THIS PRODUCT SHOULD NOT BE USED BY CHILDREN AGE 15 OR YOUNGER.
IF YOU HAVE BEEN DIAGNOSED WITH EYE DISEASE OR EYE INJURY, CONSULT YOUR
DOCTOR BEFORE USE AND DO NOT USE WITHOUT YOUR DOCTOR'S APPROVAL.
AVERTISSEMENT
LE NON-RESPECT DES PRESENTES INSTRUCTIONS D'UTILISATION IMPLIQUE DES
RISQUES DE FATIGUE, DE BLESSURE OU AUTRES AUX YEUX.
LISEZ ATTENTIVEMENT LE PRESENT MODE D’EMPLOI ET FAMILIARISEZ-VOUS AVEC
TOUTES LES INSTRUCTIONS DE SECURITE AFFERENTES.
CET APPAREIL NE PEUT ETRE UTILISE PAR DES ENFANTS AGES DE 15 ANS OU MOINS.
SI VOUS SOUFFREZ DE MALADIES OU D'AFFECTIONS OCULAIRES, CONSULTEZ
VOTRE MEDECIN AVANT D’UTILISER CET APPAREIL ET NE L'UTILISEZ PAS SANS
L’AUTORISATION DE VOTRE MEDECIN.
Personal LCD Monitor
K Glasstron
TM
PLM-S700
' 1998 by Sony Corporation
Document Outline
- Glasstron
- WARNING
- AVERTISSEMENT
- WARNING
- visuaf^isplay
- conraptin^
- WARNING
- WARNING
- SAFETY INSTRUCTIONS
- USE RESTRICTIONS
- Health Concerns
- Health Concerns
- Caution: Motion Sickness from External Mot! i.
- Caution: Accidents.
- Caution: Sound Volume.
- Warning: Proper Fit.
- Warning: No Use by Children Age 15 or Younger.
- Caution: Electric Shock.
- Caution: Do Not Disassemble.
- Caution: Avoid Wet, Humid, Dusty and Smoky Environments.
- Caution: Avoid High Temperature or Direct Sunlight/Avoid Mechanical Shock.
- Caution: Unplug the Product When Not in Use.
- About the Glasstron
- Checking the supplied accessories
- Locating the parts and controls
- Connecting the Glasstron
- Wearing the Glasstron
- Turning on the Glasstron
- Checking the display unit position
- Turn on the Glasstron sliding the POWER switch.
- Turn the PUSH DISPLAY jog dial to select the desired language, then press the jog dial.
- Read the WARNING and press the jog dial.
- Read the next WARNING and press the jog dial.
- Adjust the display unit so that you can see an asterisk (*) in each of the four corners as shown below.
- After you complete the display unit adjustment, press the jog dial.
- Read the next WARNING, then go to "Checking the screen position alignment."
- Checking the screen position alignment
- Checking the display unit position
- Setting the password
- Using the Glasstron
- Turn on the Glasstron using the POWER switch, then press PUSH DISPLAY jog dial.
- Turn the PUSH DISPLAY jog dial to enter the first number of your password, then press the jog dial. Enter the second and third numbers in the same way.
- Follow the instructions on the screen.
- Select the input signal using the PC-VIDEO switch.
- Input the signal fron) the connected equipment.
- Adjust the brightness by turning the BRIGHT contr
- Adjust the sound volume by turning the VOL control.
- After you finish using the Glasstron
- Screen warnings against overuse of the Giasstron
- Viewing the surrounding environment
- Turn the SEE-THROUGH dial.
- Set the SCREEN switch to ON.
- Adjusting the sound/picture
- Adjusting the RGB signal
- Adjusting the video signal CONTRAST
- COLOR
- Resetting the adjustment to t^e factory preset I*“ /el
- HUE
- Using the optional battery pack
- Precautions
- Error messages
- Specifications
- Index