Playing a tape, To use headphones – Sony PCM-R500 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic Operations
Playing a Tape
2
See pages 5 and 6 for hookup
information.
To use headphones
Connect them to the PHONES
connector. Use PHONE LEVEL
to adjust the volume.
3
4
1
Turn on the amplifier and set the source selector to the position
for DAT.
Press POWER.
Make sure that the KEY PROTECT switch is set to OFF (PCM-
R700 only) (see page 28).
Press OPEN/CLOSE ^ and insert a cassette.
Window side up
OPEN/CUOSE
OPENiCLOSE
until it clicks.
Do not close the cassette
holder without pressing
OPEN/CLOSE ±.
A
Press PLAY ► .
"T The deck starts playing.
Adjust the volume on the amplifier.
To
Press
Stop playing
STOP
■
Pause playing
PAUSE M. Press the button again or press PLAY
► to resume play.
Go to the next track or the
preceding track
NEXT or PREVIOUS
Fast-forward or rewind
FF ► ► or REW when the deck is stopped
Fast-forward or rewind while
monitoring the sound
FF ► ► or REW during playback. Release the
button to resume normal playback.
Take out the cassette
OPEN/CLOSE
at
after stopping playing
■