Using the remote [x, System — standby, If the component does not turn on – Sony STR-V200 User Manual
Page 9: If you use a sony tv, To turn off the components, Receiver operations
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Receiver Operations
Using the remote
[X]
The remote lets you operate the receiver and the Sony
components that are connected to it.
TV CONTROL ■
SYSTEM
— STANDBY
SYSTEM
CONTROL/
FUNCTION
C3 a Es
FaaiW
® ® ®
® ® ®
® a a
^ a •"
Ilf
CD CD t
Q CD '
Press one of the SYSTEM CONTROL/
FUNCTION buttons to select the component you
want to use.
The receiver and the selected component turn on.
The SYSTEM CONTROL/FUNCTION buttons on
the remote are factory-set as follows:
To play
Press
VHS video tapes (VTR-3mode)
VIDEO
TV programs
TV
Audio tapes or MiniDiscs (MD)
TAPE/MD
Compact Discs (CD)
CD
Radio programs
TUNER
If you want to change the factory setting of a
button
. See "Changing the factory setting of a SYSTEM
CONTROL/FUNCTION button" on this page.
If the component does not turn on
Press the power switch on the component.
2
Start playing.
See "Remote Button Descriptions" on page 22 for
details.
If you use a Sony TV
When you press TV to watch a TV program, the TV
turns on and switches to the TV input. The TV also
turns on when you press VIDEO and switch to the
appropriate video input. If the TV does not switch to
the appropriate input automatically, press TV/VIDEO
on the remote.
Watching TV without the receiver (for Sony TVs only)
Press TV CONTROL to set the remote to operate TV
functions only. When you press this button, the TV
turns on and switches to the TV input. If the TV does
not automatically switch to the TV input, press TV/
VIDEO.
Changing the factory setting of a SYSTEM
CONTROL/FUNCTION button
If the factory settings of the SYSTEM CONTROL/
FUNCTION buttons don't match your system
components, you can change them. For example, if
you have two CD players and you don't have a tape
deck or an MD deck, you can assign the TAPE/MD
button to your second CD player.
Note that the settings of the TUNER and PHONO
buttons cannot be changed.
SYSTEM
CONTROL/
FUNCTION
1
Hold down the SYSTEM CONTROL/FUNCTION
button whose function you want to change
(TAPE/MD, for example).
To turn off the components
Press SYSTEM STANDBY. This wiU also turn off the
video/audio component connected to AC OUTLET on
the back of the receiver at the same time.
10