Presetting radio stations, To change a preset station, Tuning preset stations (preset tuning) – Sony STR-DE345 User Manual

Page 12: You can tune by scanning the preset stations, Receiver operations

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Receiver Operations

Presetting Radio Stations

You'll most likely want to preset the receiver with the

radio stations you listen to often so that you don't have

to tune in the station every time. The receiver can store

a total of 30 FM or AM stations. You can store the

stations on preset numbers combining three characters

(A, B, C) and numbers (0 - 9). For example, you can

store a station as preset number Al, B6 or C9, etc.

PRESET TUNING +/-

1

Press TUNER.

The last received station is tuned in.

2

Tune in the station you want.

If you are not familiar with how to tune in a

station, see "Receiving Broadcasts" on the

previous page.

3

Press MEMORY.

"MEMORY" appears for a few seconds.

Do steps 4 to 6 before "MEMORY" goes out.

4

Press SHIFT to select a character (A, B or C).

Each time you press SHIFT, the letter "A", "B" or

"C" appears in the display.

If "MEMORY" disappears, start again from step 3.

5

Select a preset number by pressing PRESET
TUNING + or PRESET TUNING -.

6

Press MEMORY again to store the station.

7

Repeat Steps 2 to 6 to preset other stations.

To change a preset station

Preset a new station on the number you want to change.

Note

If the AC power cord is disconnected for about one week,

the preset stations will be cleared from the receiver’s

memory, and you will have to preset the stations again.

Tuning preset stations (preset tuning)

You can tune directly to a preset station by entering its
preset number. If you don't know which stations are

preset on which numbers, you can tune by scanning
the preset stations.

1

Press TUNER.
The last received station is tuned in.

2

Press SHIFT to select a character (A, B or C), then
press the number on the remote.

For example, to tune in the station preset as A7,

select A and then press 7.

You can tune by scanning the preset stations

First press TUNER and then press PRESET TUNING

+ or - to select the station you want. Each time you

press the buttons, the preset numbers change as follows:

■ Al A2 -e-» AO •<-» B1 B2 ... BO ■

- - - - - - - - - - - - - - - - ►CO-^ ... -H—C2«-*Cl-<- - - - - - - - - - - - - - - - - - - - - - - -

12

Advertising