Antenna hookups, Overview, Hookups – Sony STR-DE915 User Manual

Page 5: Audio component hookups, Isssillir

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Antenna Hookups

Overview

This section describes how to connect AM and FM
antennas to the receiver. If you want to receive radio

broadcasts, with the receiver, complete these

»nnections first, then go to the following pages.

ANTENNA

№hat antennas will I need?

> FM wire antenna

(supplied) (1)

ooeewee.

(isssillir

mmm

AM loop antenna

(supplied) (1)

Hookups

FM wire antenna

Receiver AM loop antenna

Alter connecting
iie wire antenna,
keep it as
ftorizontal as
possible.

»A»

If you have poor FM reception

Connect a 75-ohm coaxial cable (not supplied) to an FM
outdoor antenna.

FM outdoor antenna

Receiver

Ground wire (not supplied)

Getting Started

Important

If you connect an outdoor antenna, ground it against
lightning. To prevent a gas explosion, do not connect

the ground wire to a gas pipe.

Notes

• Do not use fh SIGNAL GND for this connection.
• To prevent noise pickup, keep the AM loop antenna away

from the receiver and TV.

Audio Component Hookups

Overview

This section describes how to coimect your audio
components to the receiver, if you want to use the
receiver as an amplifier, complete these connections.

Note for STR-DE915

For digital connections, see "Digital Component Hookups
(STR-DE915 only)" on page 10.

S-LINK CTRL At
(STR-OE91S/DE71S (USA, Canada) only)

PHONO CD DAT/MD TAPE

What cords will I need?

Audio cords (not supplied) (1 for each CD player and
turntable; 2 for each tape deck, DAT deck, or MD deck)

White (L)

Red (R)

Hookups

The arrow ' indTcates signal flow.

CD player

White (L)

Red (R)

Receiver

CD player

Tape deck

Receiver

Tape deck

(Continued)

Advertising
This manual is related to the following products: