Sony KFO50WE610 User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Turn off the power switch on the LCD projection T V and after several
minutes, unplug the power cord.

(The cooling fan will continue to blow for about two minutes after

turning the power off.)

-ife) Do not touch the front glass of a new lamp or the glass of the lamp

receptacle. This may reduce picture quality or lamp life.

Unplug the power cord after turning off the main power. Wait at least 30
minutes to allow the lamp to cool down before replacing it.
Take the new lamp out of the box.

Loosen the screws on the rear side panel.

Remove the front panel.

Loosen the screw with a coin or similar object to remove the lamp cover.

14

Advertising
This manual is related to the following products: