Sony KFO50WE610 User Manual

Page 3

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Operate the LCD Projection TV only on 120 V AC.

The plug is designed, for safety purposes, to fit into

the wall outlet only one way. If you are unable to

insert the plug fully into the outlet, contact your

dealer.

If any liquid or solid object should fall inside the

cabinet, unplug the LCD Projection TV immediately

and have it checked by qualified service personnel

before operating it further.

If you will not be using the LCD Projection TV for

several days, disconnect the power by pulling the plug

itself Never pull on the cord.

For details concerning safety precautions, see

“Important Safeguards” on page 4.

Pour prévenir les chocs électriques, ne pas utiliser cette

fiche polarisée avec un prolongateur, une prise de courant

ou une autre sortie de courant, sauf si les lames peuvent tre

insérées à fond sans en laisser aucune partie à découvert.

The model and serial numbers are located at the rear of the

LCD Projection TV, below the Sony logo, on the sticker,

and also on the TV box (white label). Record these

numbers in the spaces provided below. Refer to them

whenever you call upon your Sony dealer regarding this

product.

Model No.______________________________

Serial No._____________________________

To prevent internal heat buildup, do not block the

ventilation openings.

Do not install the LCD Projection TV in a hot or

humid place, or in a place subject to excessive dust or

mechanical vibration.

Avoid operating the LCD Projection TV at

temperature below 41°F (5°C).

If the LCD Projection TV is transported directly from

a cold to a warm location, or if the room temperature

changes suddenly, the picture may be blurred or show

poor color. In this case, please wait a few hours to let

the moisture evaporate before turning on the LCD

Projection TV.

To obtain the best picture, do not expose the screen to

direct illumination or direct sunlight. It is

recommended to use spot lighting directed down from

the ceiling or to cover the windows that face the

screen with opaque drapery. It is desirable to install

the LCD Projection TV in a room where the floor and

walls are not of a reflective material.

As an ENERGY STAR® Partner,

^Sony Corporation has determined

f

that this product meets the

ENERGY STAR® guidelines for

--------------- energy efficiency.

ENERGY STAR® is a U.S. registered mark.

TruSurround, SRS and the ( # )® symbol are trademarks

ofSRS Labs, Inc.

TruSurround technology is incorporated under license

from SRS Labs, Inc.

BBE and BBE Symbol are trademarks of BBE Sound, Inc.

and are licensed by BBE Sound, Inc. under U.S. Patent No.

4,638,258 and 4,482,866.

Advertising
This manual is related to the following products: