General, Fix settings (see page 76) – Sony KFO50WE610 User Manual

Page 97

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

General

How to restore Video settings

to factory settings

How to restore Audio settings

to factory settings

Cannot cycle through the other

video equipment connected to

the TV

Cannot operate Menu

Press

RESET

on the remote control while in the Video Menu (see page 69).

Press

RESET

on the remote control while in the Audio Menu (see page 72).

Be sure the

Video Label

option is not set to

Skip

(see page 83).

If a menu option appears in gray, this indicates that the menu option is not

available.

Lost password

LED on the display unit is lit

LCD projection TV is fixed to

one channel

In the password screen (see page 78), enter the following master password:

4357.

The master password clears your previous password; it cannot be used to

temporarily unblock channels.

blinks continuously, this may indicate the TV needs a service.

The TIMER LED indicates that the timer is set. When the timer is set, this LED

will remain lit even when the LCD porjection TV is turned off.

Use

Auto Program

in the Channel menu to add receivable channels that

are not presently in TV memory (see page 76).

Check your

Channel

Fix settings (see page 76).

97

Advertising
This manual is related to the following products: