Connecting optional av components, Connecting audio components, Connecting a turntable – Sony LBT-D690 User Manual
Page 8: Connecting surround speakers, Connecting a vcr
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting optional
AV components
To onhonco your system, you can connect
optional components. Refer to the
instructions included with each component
for details.
Connecting audio
components
Connecting a turntable
Be sure to match the color of the plugs and
the connectors. To listen to the sound from
the connected turntable, press FUNCTION
repeatedly until "PHONO" appears.
To the audio output of the turntable
Connecting surround speakers
(LBT-D590/D690/XB600/XB6/XB6K only)
You can connect optional surround speakers.
8
Note
Using the turntable at high volume may cause
distortion or howling. This is often caused by the
bass sound from the speakers. The bass sound may
be picked up by the needle of the turntable, and
produce the distortion or howling. To avoid this, do
the following:
1
Keep some distance between the speakers and the
turntable.
2
Stop using the surround effect.
3
Install the speakers or the turntable on a firm and
stable surface.
4
Press DBFB repeatedly until "DBFB ^\\\\\ "
disappears from the display {LBT-D290/G3300/
XB3/XB3K only).
Press SUPER WOOFER repeatedly until the
indicator on this button goes off (except for LBT-
D290/G3300/XB3/XB3K).
Note
You need to connect both left and right surround
speakers. Otherwise, the sound will not be heard.
Connecting a VCR
Be sure to match the color of the plugs and
the connectors. To listen to the sound from
the connected VCR, press FUNCTION
repeatedly until "VIDEO" appears.
To the audio output of the VCR