Sony KP-48V80 User Manual

Page 19

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

1

Using the AUDIO cnble supplied with the

speaker to AUDIO (VAR/FIX) OUT on
the projection TV.

2

Using the CONTROL S cable, connect

CONTROL S IN on the speaker to
CONTROL S OUT on the projection TV.

Connecting an amplifier that
supports Dolby Pro Logic decoder

If you use an amplifier with a Dolby Pro
Logic decoder instead of the projection TV's
audio system, you can still use the projection

TV's center speaker.

1

Using the speaker cords (supplied with

the amplifier), connect the speaker
terminals on the amplifier to CENTER

SPEAKER IN +/- on the projection TV.

2

Using an AUDIO cable, connect AUDIO

(VAR/FIX) OUT on the projection TV to

one of the unused Line inputs (e.g. Tape-
2, AUXl, etc.) on the amplifier (White-
AUDIO Left, red-AUDIO Right).

3

Set the amplifier to the chosen Line input

and use the Audio menu to set "Speaker"
to "Center" on the projection TV. (see
"Speaker" on page 32)

Disconnect all power sources before making any connections.

(Rear of projection TV)

AUDIO-L

(white)

CENTER

SPEAKER

IN ®, ©

- RK-74A

(not supplied)

inputs

Amplifier with

Dolby Pro Logic

decoder

Front

speaker (L)

Rear

r

L

Rear

speaker (L)

speaker(R)

Front

speaker(R)

Woofer

15

Advertising
This manual is related to the following products: