Using the audio menu, To select the audio menu, To restore the factory settings – Sony KP-48V80 User Manual
Page 35: Ji using the audio menu
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the Audio Menu
B a s s
W T S / S A P :
A u t o V 0 I u I
E f f e c t T r
S p e a k e r :
: S U r
S A V A S P C o n t r o l
M o v e : • S e l e c t s E x i t
For detailed information on using the remote
control to modify menu settings, refer to
“Learning Menu Selection" on page 29.
To select the Audio menu:
To restore the factory settings
Press RESET on the remote control while the
Audio menu is selected.
Adjust slider right (up) to increase high pitched sounds.
Adjust slider left (down) to decrease high pitched sounds.
Adjust slider right (up) to increase low pitched sounds.
Adjust slider left (down) to decrease low pitched sounds.
Adjust slider right (up) to emphasize right speaker volume.
Adjust slider left (down) to emphasize left speaker volume.
bilingual and mono
When the sound is intermittent due to poor reception conditions, select “Stereo”
Select for stereo reception when viewing a program broadcast in stereo.
Select to listen to a bilingual broadcast. (non-SAP programs will be muted
when this feature is selected)
Select for mono recepfion. (use to reduce noise during stereo broadcasts)
Select to listen to SAP when a SAP program is broadcast and return
to stereo reception automatically for non-SAP programs.
Quick MTS access: Press (—^ on the remote control to cycle through the
“MTS/SAP” options as follows: Stereo —» SAP —► Mono —► Auto SAP.
Adjust the sound
Sound output coming from TV speakers have the volume level equalized for all
channel audio inputs when broadcasts have different sound transmission levels.
Sound output coming from the TV speakers varies according to the received
effects based on the
“Effect” can only be set when “Speaker” is set to “On” or “Off.”
Produces a virtual surround effect for Dolby-surround encoded
Adds a surround-like effect to mono programs.
Normal stereo or mono reception.
Quick Effect access: Press (J) on the remote control to cycle through the
“Effect" options as follows: Trusurround —► Simulated —♦ Effect Off.