0 using the timer menu, To select the timer © menu, Daylight savings – Sony KP-48V80 User Manual
Page 37: Current time, On/off timer, D using the timer menu, Using the timer menu
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the Timer Menu
After setting the clock you can use the timer
to turn the projection TV on and off.
For detailed information on using the remote
control to modify menu settings, refer to
"Learning Menu Selection" on page 29.
To select the Timer © menu:
Highlight © '
Set daylight saving time before setting the clock. Any
loss of power will cause these settings to be erased.
adjusts the lime.
Necessary for the
Wake up or
to compensate for Daylight Saving Time.
The current time automatically moves ahead one hour.
at the end of Daylight Saving Time.
The current time moves back one hour.
1 Press V , then move the joystick up or down until
the current day (Sun - Sat) is displayed, and press
2 Move the joystick up or down until the current hour
and AM/PM is displayed, and press © .
3 Move the joystick up or down until the current minute
(00-59) is displayed, and press © ,
The clock has now started. Press MENU to exit.
Select ft Exit
1 Move the joystick up or down until the desired day or
range of days (Every Sun-Sat, Every Mon-Fri,
Sunday, Monday, ....Saturday, Every Sunday,
....Every Saturday) is displayed, and press © .
2 Move the joystick up or down until the time (hours
and minutes) that you want the projection TV to
remain on is displayed, and then press © .
3 Move the joystick up or down to set the time duration (maximum of 6 hours)
and press © .
4 Move the joystick up or down to select the desired channel and press © .
The timer is now set. The TIMER/STAND BY indicator on your projection TV
will be lit.
Press MENU to exit. To cancel your timer setting, press RESET while in the
On/Otf Timer window. Performing Auto Program will erase all Timer settings.