Video label, Video label options, Ideo – Sony KP-48V80 User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Video Label
Easy
recognition ot
connected equipment
(e.g. SAT VHS. etc )
This feature allows you to label each input mode so that you can easily identify the connected equipment
(e.g, you can label VIDEO 1 IN as VHS).
With the Video Label window open:
1 Move the joystick up or down to select the input mode you want to label and press .
2
Move the joystick up or down to select the label and press 0 .
Video Label Options:
VIDEO
1: VIDEO 1, VHS, 8mm, Beta, LD, SAT, DVD, AV RECEIVER, DTV, Skip
VIDEO 2/3:
VIDEO 2A/IDEO 3, VHS, 8mm, Beta, LD, SAT, DVD, DTV, Skip
VIDEO 4/5:
VIDEO 4A/IDEO 5, SAT, DVD, DTV, Skip
If you select “Skip,” your projection TV will skip this connection when you scan through video sources
using the TVA/IDEO button.
I D E 0 2
I D E 0 3
I D E 0 4
I D E 0 5 .
IDEO’
I D E 0 2
I
D E 0 3
I
D E 0 4
I
D E 0 5
M o v e - ! - S e l e c t » E x i t
Direct Play
Easy operation of a
connected VCR
This feature allows you to switch the input mode from the TV to a Sony VCR (MDP or DVD) and start
playing by only pressing the ► (playback) button on the remote control. You have to set the VTR1/2/3/DVD/
MDP switch on the remote control (e.g., you connect your VCR to the VIDEO 3 IN jacks and set the VTR1/2/
3/DVD/MDP switch to VTR 3).
With the Direct Play window open:
1
Move the joystick up or down to select the input to which your video equipment is connected,
and press © .
2
Move the joystick up or down to select the position of the VTR 1/2/3/DVD/MDP switch, and press © .
Flash Focus
Automatic convergence
adjustment
Select
Yes
and press © to start Flash Focus adjustment. When the adjustment is completed, the cross pattern on the screen
becomes white, (for details, see page 20)
Select
No
to cancel Flash Focus.
39