Sony KP-48V80 - Manual (Page 8)

Installing and Connecting the Projection TV (continued)
Connector Types
'»'ou ma\' find it noc(.'ssar\- to use some of the
following connector types during set up.
Coaxial cable
Standard TV cable and antenna cable
PlugType
'Cl ^ (°S Push into connection.
Screw-onType
J^' Screw into connection.
S Video cable
High quality video cable for enhanced
picture quality
^ ^ Align guides and
^ push into connection.
^=cni (0
AudioA/ideo cable
♦ Push into connection.
Video - Yellow
Audio (Left) - White
Audio (Right) - Red
Some DVD Players and DTV Receivers are
equipped with the following three video
connectors.
Y - Green
P b (C b , Cb or B-Y) - Blue
. P r (C r , Cr or R-Y) - Red
S-Link/CONTROL S cable
Son\’ cable for S-Link and CONTROL S
connections. These features are oxclusix e to
Sony products and allow greater control of
all Sony equipment.
gD Push into connection.
Note:
• For S-Link and CONTROL S connections,
you can use the combined S-Link/
CONTROL S cable provided with some
Sony video equipment, or you can purchase
a separate S-Link/CONTROL S cable (RK-
G69HG).
About the CONTROL S OUT jack
To control other Sony equipment with the
projection TV's remote control, connect the
CONTROL S IN jack of the equipment to the
CONTROL S OUT jack on the projection TV
with the CONTROL S cable.
Making Connections
Connecting directly to a cable or
an antenna
The connection you choose will depend on
the cable found in your home. New'er homes
will be equipped with standard coaxial cable
(see
A); older homes will probably have 300-
ohm twin lead cable (see B); still other homes
may contain both (see C).
Use 75-ohm coaxial cable for improved
picture quality (see
A).
B
VHFonly
or
VHFAJHF
or
CaUe
• VHFonly
or
• UHFonly
or
• VHFAJHF
75-ohm
coaxial cable
(Rear of
projection TV)
VHF/UHF
300-ohm twin
lead cable
(Rear of
projection TV)
VHF/UHF
Antenna connector