Specifications, Audio power specifications, Amplifier section – Sony SS-RC301 User Manual

Page 21: Am tuner section, Tuner section, Fm tuner section, Video section (str-de335 only), Continued), Additional information

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Additional Information

Specifications

Audio power specifications

POWER OUTPUT AND TOTAL
HARMONIC DISTORTION

With 8-ohm load, both

channels driven, from 20®’ -
20,000 Hz, rated 100 watts
per channel minimum RMS
power, with no more than

0.09 %**’ total harmonic
distortion from 250
milliwatts to rated output.
STR-SE391;

a) 40 Hz

b) 0.5 %

Amplifier section

stereo mode STR-DE335:

(8 ohms at 20 Hz - 20 kHz

less than 0.09% total
harmonic distortion)
lOOW + lOOW

STR-SE391:
(8 ohms at 40 Hz - 20 kHz

less than 0.5% total
harmonic distortion)
100 W + 100 W

Surround mode

STR-DE335:

and 5.1 CH/DVD

(8 ohms at 1 kHz, THD

mode

0.8 %)

Front; 80 W/ch
Center; (Pro Logic Mode)

80 W

Rear; 80 W/ch

STR-SE391:
(8 ohms at 1 kHz, THD

0.5 %)

Front; 80 W/ch
Center; (Pro Logic Mode)

80 W

Rear; 80 W/ch

Frequency

PHONO; RIAA

response

equalization curve
±0.5 dB
(STR-SE391 only)

TV/SAT, CD, MD/TAPE,
VIDEO, 5.1 CH/DVD:

10 Hz - 50 kHz ±1 dB

Inputs

Sensitivity

Impedance

S/N

PHONO
(STR-
SE391
only)

4 mV

50

kilohms

70 dB

CD,
5.1 СН/
DVD,
MD/TAPE,

TV/SAT,
VIDEO

250 mV

50

kilohms

80 dB

S/N

Mono: 76 dB
Stereo: 70 dB

Harmonic

Mono: 0.3 %

distortion at 1 kHz

Stereo: 0.5 %

Separation

45 dB at 1 kHz

Frequency
response

30 Hz-15kHz : dB

AM tuner section

Tuning range

10 kHz interval’

530 - 1710 kHz

9 kHz interval

531 -1710 kHz

Antenna

Loop antenna

Outputs

MD/TAPE REC OUT:

Voltage: 250 mV,
Impedance: 10 kilohms

VIDEO AUDIO OUT:

Voltage; 250 mV,
Impedance; 10 kilohms

WOOFER:

Voltage: 2 V
Impedance; 1 kilohms

PHONES: Accepts low

and high impedance
headphones

Muting

Full mute

BASS BOOST

-t-10 dB at 70 Hz

TONE

±8 dB at 100 Hz and

10 kHz

Tuner section

FM stereo, FM/AM superheterodyne tuner

FM tuner section

Tuning range

87.5 -108.0 MHz

Antenna terminals

75 ohms, unbalanced

Intermediate

10.7 MHz

frequency

Sensitivity

Mono; 18.3 dBf, 4.5 pV

Stereo: 38.3 dBf, 45 fiV

Usable sensitivity

11.2 dBf, 2 fiV (IHF)

Intermediate

450 kHz

frequency

Usable sensitivity

50 dB / m (at 1,000 kHz or

999 kHz)

S/N

Harmonic

distortion

54 dB (at 50 mV/ m)

0.5 % (50 mV/m,

400 Hz)

Selectivity

At 9 kHz: 35 dB
At 10 kHz: 40 dB

* You can change the AM tuning interval

between 9 kHz and 10 kHz. Turn off the
receiver and press I /

(

1

)

(power) for more

than 4 seconds until "INITIAL" appears.
1) After tuning in any AM station, turn

off the receiver.

2) Hold down PRESET TUNING -t button

and press the I /

(

1

)

(power) button.

"9k STEP" appears.

To change to 10k Step, repeat step 1 and 2
until "10k STEP" appears. Note that all
preset stations, index names and sound field
are cleared after you make the procedure
above.

Video section (STR-DE335 only)

Inputs

VIDEO, TV/SAT, 5.1

CH/DVD:

1 Vp-p 75 ohms

Outputs

General

System

Selectivity

60 dB at 400 kHz

Power
requirements

Power
consumption

VIDEO, MONITOR:

1 Vp-p 75 ohms

Tuner section: PLL

quartz-locked digital
synthesizer system

Preamplifier section:

Low-noise NF type
equalizer

Power amplifier

section: Pure­
complementary SEPP

120 V AC, 60 Hz

230W

(continued)

21

Advertising
This manual is related to the following products: