Recording from a tape, Press ii, To stop dubbing – Sony LBT-G5500 User Manual
Page 18: Tips, Notes, 1 press ± eject and insert a, Recorded tape in deck a and a blank tape in deck b
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording from a
tape
— High-speed Dubbing
You can use TYPE I (normal) or TYPE II
(CrO:) tapes. The recording level is
automatically adjusted.
i/c!)
(Power)
Press II.
Dubbing starts.
When dubbing ends, decks A and B
automatically stop.
To stop dubbing
Press ■ on deck A or B.
Tips
• When you dub on both sides, start recording fron:\
the front side. If you start from the reverse side,
recording stops at the end of the reverse side.
• You don't have to set DOLBY NR, since the tape in
deck B is automatically recorded in the same state
as the tape in deck A.
Notes
• If you set DIRECTION to when the tapes you
use have different lengths, the tape in each deck
reverses independently. If you want to start
dubbing from the same point for the other side, set
DIRECTION to and reverse tapes manually
after both decks stop. Then press H SPEED DUB
again to start recording the other side.
• You cannot record the surround effect.
1
Press ± EJECT and insert a
recorded tape in deck A and a blank
tape in deck B.
With the side you want to
play/record on facing forward
Deck B stands by for recording.
Press DIRECTION repeatedly to
select to record on one side or
to record on both sides.