Sony LBT-G5500 - Manual (Page 22)

Programming CD tracks
(continued)
7
Repeat steps 4 through 6 to program
additional tracks.
Skip step 4 to select tracks from the
same disc.
8
Press C>.
All the tracks play in the order you
selected.
To cancel Program Play
Press PLAY MODE repeatedly until
"PROGRAM" or "SHUFFLE" disappears
from the display.
To Press
Check the program CHECK on the remote
repeatedly. After the
last track, "CHECK
END" appears.
Clear the last selected
track CLEAR on the remote
in stop mode.
Clear a specific track CHECK on the remote
repeatedly until the
number of the track to
be cleared lights up,
then press CLEAR.
Add a track to the
program
1 Press DISC SKIP to
select a CD.
2 Turn the jog dial to
select a track.
3 Press PLAY MODE.
Clear the entire
program
■ once in stop mode or
twice while playing.
Tips
• The program you created remains in the CD
player's memory even after it has been played.
Press O to play the same program again.
• I f a p p e a r s instead of the total playing time
while programming, this means:
- you have programmed a track numbered over
20, or - . _
- the total playing time has exceeded 100 minutes.
Playing CDs
without
interruption
— Non-stop Play
You can play CDs without pausing between
tracks.
1
Press FUNCTION repeatedly until
"CD" appears in the display.
2
Press NON-STOP so the indicator
on this button lights up.
3
Press I>.
To cancel Non-Stop Play
Press NON-STOP so the indicator on this
button goes off.