Adjusting the audio emphasis, Note, Adjusting the graphic equalizer – Sony LBT-G5500 User Manual
Page 30: Activating the surround effect
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjusting the
audio emphasis
You can acJjust the audio emphasis using the
graphic equalizer and surround effect.
Adjusting the graphic
equalizer
You can adjust the sound by raising or
lowering the levels of specific frequency
ranges.
Before operation, first select the basic audio
emphasis you want for your sound.
6 2 3,4
1
Select the basic audio emphasis you
want for your sound (see "Selecting
the audio emphasis").
2
Press GEQ CONTROL.
The frequency range appears and the
level value flashes in the display.
3
Press GEQ repeatedly to select
a frequency band.
LBT-D390/D790/G5500/XB33/XB33K/XB44/
XB44K/XB50/XB60
to %
—
•/=
' T T T '
1 r H /
LBT-XB66/XB66K/XB660
Lj ^
-
-4,.
1 r.HZ
4
Press GEQ ♦/♦ to adjust the level.
LBT-D390/D790/G5500/XB33/XB33K/XB44/
XB44K/XB50/XB60
I » l
4
:
T T ^------
LBT-XB66/XB66K/XB660
i QIJ
t
V»*
_
5
Repeat steps 3 and 4 to adjust the
other frequency bands.
6
Press ENTER when finished.
Note
If you choose another audio emphasis (other than
"EFFECT OFF"), the adjusted sound effect is lost. To
retain the adjusted sound effect for future use, store
it in a personal file (see "Making a personal audio
emphasis file").
Activating the surround
effect
You can enjoy the surround effect.
SURROUND
Press SURROUND so "SUR liii™iiii '
appears in the display.
Note
If you choose other sound effects, the surround
effect will be canceled. To retain the effect, store it in
a personal file (see "Making a personal audio
emphasis file").