Specifications, For the u.s. model, Audio power specifications – Sony LBT-G5500 User Manual
Page 43: Amplifier section
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Specifications
For the U.S. model
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 8 ohm loads, both channels driven, from
70 - 20,000 Hz; rated 100 watts per channel
minimum RMS power, with no more than
0.9% total harmonic distortion from
250 milliwatts to rated output.
Amplifier section
(LBT-D390 / D790 / G5500)
Continuous RMS power output
120 + 120 watts
(8 ohms at 1 kHz, 10%
THD)
Total harmonics distortion
Less than 0.07%
(8 ohms at 1 kHz, 50 W)
(LBT-XB50)
DIN power output (Rated)
80 + 80 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
100 + 100 watts
(8 ohms at 1 kHz, 10%
THD)
Music power output (Reference)
170 + 170 watts
(8 ohms at 1 kHz, 10%
THD)
(LBT-XB60)
DIN power output (Rated)
100 + 100 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
120 + 120 watts
(8 ohms at 1 kHz, 10%
THD)
Music power output (Reference)
210 + 210 watts
(8 ohms at 1 kHz, 10%
THD)
(LBT'XB33/XB33K)
The following measured at AC 120/240 V, 50 Hz
DIN power output (Rated)
100 + 100 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
120 + 12DVatts
(6 ohms at 1 kHz, 10%
THD)
Peak music power output (Reference)
1,500 watts
(LBT-XB44/XB44K)
The following measured at AC 120/240 V, 50 Hz
DIN power output (Rated)
120+ 120 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
140 + 140 watts
(6 ohms at 1 kHz, 10"o
THD)
Peak music power output (Reference)
2.000 watts
(LBT-XB66 / XB66K / XB660)
The following measured at AC 120/240 V, 50 Hz
DIN power output (Rated)
140+ 140 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
170 + 170 watts
(8 ohms at 1 kHz, l0"i.
THD)
Peak music power output (Reference)
3.000 watts
Inputs
PHONO IN (phono jacks):
sensitivity 3 mV,
impedance 47 kilohms
MIX MIC (phone jack):
sensitivity 1 mV,
impedance 10 kilohms
(LBT-D390/D790/G5500)
VIDEO (AUDIO) IN (phono jacks):
sensitivity 250 mV,
impedance 47 kilohms
(LBT-XB33/XB33K/XB44/XB44K/XB50/XB60/
XB66/XB66K/XB660)
VIDEO/MD (AUDIO) IN (phono jacks):
sensitivity 250 mV,
impedance 47 kilohms
Outputs
PHONES (stereo phono jack):
accepts headphones of 8
ohms or more
(LBT-XB33/ XB33K / XB44 / XB44K / XB50/ XB60 /
XB66/XB66K/XB660)
VIDEO/MD (AUDIO) OUT (phono jacks):
voltage 250 mV,
impedance 1 kilohm
SPEAKER;
(LBT-D390/D790/G3500/XB50/XB60/XB66/
XB66K/XB660)
accepts impedance of 8 to
16 ohms.
(LBT-XB33 / XB33K / XB44 / XB44K) accepts
impedance of 6 to 16
ohms.
SURROUND SPEAKER
(LBT-D790/ XB33 / XB33K / XB50/ XB6i).only)
accepts impedance of 16
ohms