Vcr connections, Connecting an antenna/cable tv system with a vcr, Connecting a vcr and tv with a cable box – Sony WEGA KV-36FS10 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VCR Connections
Connecting an antenna/cable TV
system with a VCR
1
Attach the coaxial connector from your
cable or antenna to IN on your VCR.
2
Using A/V connectors, connect AUDIO
and VIDEO OUT on your VCR to AUDIO
and VIDEO IN on your TV.
3
Using a coaxial connector, connect OUT on
your VCR to VHF/UHF on your TV.
' r V
If\/ou are connecting a monaural VCR, connect only the
single white audio output to the left input on your TV.
Connecting a VCR and TV with a
cable box
1
Connect the coaxial cable from the wall to
IN on your cable box .
2
Using a coaxial connector, connect OUT on
your cable box to IN on your VCR.
3
Connect a coaxial cable (not supplied)
from the OUT jack on your VCR to
VHF/UHF on your TV.
4
Using A/V connectors, connect AUDIO and
VIDEO OUT on your VCR to AUDIO and
VIDEO IN on your TV.