Tv and satellite receiver – Sony WEGA KV-32FS12 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
TV and Satellite Receiver
Connecting Your TV
Rear of TV
Satellite
antenna
cable
1
Connect the cable from your satellite antenna to SATELLITE IN on
your satellite receiver.
2
Connect the coaxial cable from your cable or antenna to the
VHF/UHF jack on your TV.
3
Using A/V cables, connect AUDIO and VIDEO OUT on your
satellite receiver to AUDIO and VIDEO IN on your TV.
^
For optimum picture quality, use S VIDEO instead of the yellow A/V cable.
S VIDEO does not provide sound, the audio cables must still be connected.
^ You can use the button to switch between the VHFAJHF and satellite
receiver inputs.
Advertising
This manual is related to the following products: