Sony WEGA KV-32FS12 - Manual (Page 35)

Operating Instructions
Channel Fix 2-6: Select when you want to control all channel selection
through a cable box or VCR. Select the appropriate channel
(usually 3 or 4) and use the cable box's or VCR's remote
control for channel selection.
Video 1 : Select from available video inputs when you have
connected video equipment (e.g. satellite receiver) and you
want your TV fixed to it.
AUX 2-6: Select when the cable box is connected to AUX
input.
Perform Auto Program whenever setting up your TV.
It will cycle through all available channels and program
any receivable channels.
Use this feature after you run Auto Program to skip
unwanted channels or add new ones.
1 Use the (o)"® buttons or the [CH+/-] buttons to select
the channel, then press cs.
2 Press cs to Skip or Add (only one option will be
available).
With the Channel Label window open:
1 Press cs, then press 0 or O until you reach the desired
channel number.
2 Press C 2 D to activate the channel.
3 Press O’ then press O or cs to highlight the label field.
4 Press O or 0 to display the first call letter or number of
the caption and press cs to select it. When finished,
press CQ to activate.
^ Favorite Channel, Channel Skip/Add, and Channel Label cannot be used
when Channel Fix is set.
Auto Program
Channel
Skip/Add
Channel
Label
Labe/ up to 40
channels ivith
t/ieir call letters
26