Note on standby mode, Note on recording, Notes on the tape counter – Sony CCD-TRV95 User Manual

Page 15: Note on the beep sound, Note on the auto date feature, Camera recording

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Camera recording

Note on Standby mode

If you lea\ e the camcorder in Standby mode for 5 minutes while the cassette is inserted,

the camcorder turns off automatically for saving battery power as well as for

pre\ enting the battery and tape from wearing down. To resume Standby mode, turn

STANDBY down and up again. To start recording, press START/STOP.

Note on recording

When you record from the beginning of a tape, run the tape for about 15 seconds before

starting the actual recording. This will ensure that you won't miss any start-up scenes

when you play back the tape.

Notes on the tape counter

• The tape counter indicates the recording or playback time. Use it as a guide. There

will be a time lag of several seconds from the actual time. To set the counter to zero,

press COUNTER RESET.

• If the tape is recorded in SP and LP modes mixed, the tape counter shows incorrect

recording time. When you intend to edit the tape "sing the tape counter as a guide,

record in same (SP or LP) mode.

Note on the beep sound

The beep sounds when you operate the camcorder. Several beeps also sound as a

warning of any unusual condition of the camcorder.

Note that the beep sound is not recorded on the tape. If you do not want to hear the

beep sound, select "OFF" in the menu system.

Note on the AUTO DATE feature
- CCD-TRV95 only

The clock is set to East Coast Standard Time at the factory. You can reset the clock m the

menu system. You can change the AUTO DATE settings by selecting ON or OFF in the

menu system. The AUTO DATE feature shows the date automatically once a day.

However, the date may automatically appear more than once a day when:

- you reset the date and time.

- you eject and insert the tape again.

- you stop recording within 10 seconds.

- you set AUTO DATE to OFF once and set it to ON again in the menu system.

14

Advertising
This manual is related to the following products: