Ccd-trv99 only, To display the date or time when you recorded, When bars (—:—:—) appear – Sony CCD-TRV95 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Playing back a tape
Displaying the date or time when you recorded - Data Code
function
- CCD-TRV99 only
Even if you did not record the date or time when you were recording, you can display
the date or time when you recorded (Data Code) on the TV during playback or editing.
The Data Code is also displayed in the viewfinder and on the LCD screen.
To display the date or time when you recorded
Press DATE or TIME on the camcorder. To make the date or time disappear, press it
again.
To display the date and time when you recorded, press TIME (or DATE) after pressing
DATE (or TIME). To make the date and time disappear, press DATE and TIME again.
To display simultaneously the date and time when you
recorded
Press DATA CODE on the Remote Commander. To make the date and time disappear,
press it again.
When bars (—:—:—) appear
• A blank portion of the tape is being played back.
• The tape'was recorded by a camcorder without the Data Code function.
• The tape was recorded by a camcorder without having date and time set.
• The tape is unreadable due to tape damage or noise.
• The tape was recorded in LP mode.
• The tape is being played back in variable speed (Slow Playback, etc.).
• An index signal is marked, the RC time code is written, or PCM after recording is
made on the tape.
25