To cancel index scan mode, Locating the marking position – Sony CCD-TRV95 User Manual
Page 76
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Locating the marking position
Scanning the beginning of each marking position - index scan
(1) Press INDEX on the Remote Commander during normal playback.
(
2
) Press or The tape rewinds or advances rapidly and plays back for
approximately 10 seconds from the point on which the index signal was
marked. If you want to confinue playback, press ►. When you do not press
any button, the tape is automatically scanned to the next program.
>
Q.
To cancel index scan mode
Press Normal playback resumes.
73
Advertising
This manual is related to the following products: