Inserting a lithium battery – Sony GV-500 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Before you set the clock, install a lithium battery. With a lithium battery installed, this unit powers
the clock and keeps the last channel in memory when the power source is disconnected.
Inserting a Lithium Battery
1
Pull out the lithium battery holder.
Pull Down
2
Insert the supplied CR2032 lithium battery with
the (plus) side facing out.
• Wipe the battery with a dry cloth to assure good
contact.
• Be sure to install the battery with the correct polarity,
otherwise the battery will not be connected.
3
Put the lithium battery holder back into the
video TV recorder.
Be sure to install to the point where it cannot be
pushed further.
1 8