Connecting the remote tvs, Notes, Connectiong the remote tvs – Sony MRD-D1 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Connecting the Remote TVs
1 MRD-Dl will support (provide signal for, and IR remote control of
two video sources for) five remote TV locations. Connect the
modulator unit directly to each TV via a 75-ohm coaxial cable and
an IR target.
Notes
•
Additional IR targets can be added as desired. They are available from
your Sony dealer.
• If the system is improperly tuned, the power indicator will blink. Do
not ignore a blinking power indicator even if the TV is showing a
picture. Repeat the tuning procedure.
10 Installation Instructions
Advertising