Changing channels, To change the window picture, To change the main picture – Sony KV 32S40 User Manual
Page 20: Notes, Using yout new tv (continued)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Yout New TV (continued)
Use the Yellow Labeled Buttons for PIP Operations
CH
©
©'
Press to change the channel. You must press VTR/DVD (FUNCTION), then
use the mam CFI +/- buttons to change channels in the window picture, (see right)
POSITION
Press to move the location of the window picture (counterclockwise) around the
0
main picture.
FREEZE
Press to freeze the window picture. Great for copying down phone numbers.
©
addresses, recipes, etc.
Press FREEZE again to restore the picture.
SWAP
Press to switch the audio and video of the main picture and the window picture.
©
Each time you press SWAP, the picture and sound of the two will be swapped
CHANGING CHANNELS
1
Press TV/VIDEO until you reach the TV input.
2
Press PIP (the window picture appears).
To change the window picture:
1
Press VTR/DVD (FUNCTION).
2
Press the main CFI +/- buttons
to change channels.
©
a
To change the main picture;
1
Press TV (FUNCTION).
2
Press the main CH +/- buttons to change
channels.
Notes
• If you have the same program in both the
window and the main picture and cannot
change the channel in the window; press
TVA/IDEO until you reach the TV input in
the main picture.
• Your remote control must be programmed
to operate the VCR. (see page 30)
18