Connecting a vcr and projection, Tv with a cable box, With a cable box – Sony KP-61XBR200 User Manual

Page 12: Installing and connecting the proie, Tion tv (continued)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Installing and Connecting the Proie’:

Connecting a VCR and projection

TV with a cable box

1 Connect the single (input) jack ot the

Splitter to your incoming cable
connection, and connect the other two
(output) jacks (using coaxial cable) to IN
on your cable box and VHF/UHF on your
projection TV.

2 Using a coaxial connector, connect OUT

on your cable box to IN on your VCR.

3 Using AUDIO/VIDEO connectors,

connect AUDIO and VIDEO OUT on your
VCR to AUDIO and VIDEO IN on your

projection TV (Yellow-VIDEO, White-
AUDIO Left, Red-AUDIO Right).

Note:

• To view scrambled channels through your

cable box, select the video input which
your cable box is connected to by pressing

TV/VIDEO.

tion TV (continued)

Disconnect all power sources before making any connections.

(Rear of projection TV)

Advertising
This manual is related to the following products: