Instailino and, Ccnnectmg the projection tv (continued), Instailino – Sony KP-61XBR200 User Manual
Page 22: Projection tv (continued), Ccnnectmg the
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Instailino
and
Connecting an amplifier with
Dolby Pro Logic decoder
If you use an amplifier with Dolby Pro Logic
decoder instead of the projection TV's audio
system, you can still use the projection TV's
center speaker.
1 Using the speaker cords (supplied with
the amplifier), connecf the speaker
terminals on your amplifier to CENTER
SPEAKER IN +/ - on your projection TV.
2 Using AUDIO/VIDEO connectors,
connect AUDIO (FIX) OUT on your
pirojection TV to one of the unused Line
inputs (e.g. Tape-2, AUXl, etc.) on your
amplifier (White-AUDIO Leff, red-
AUDIO Right).
3 Set your amplifier to the chosen Line
input and use the AUDIO menu to set
"SPEAKER" to "CENTER IN" on your
projection TV. (see "SPEAKER" on page
38)
Ccnnectmg the
Projection TV (continued)
Disconnect all power sources before making any connections.
{Rear of projection TV)
AUDIO
(FIX) OUT-L
(white)
* Manufactured under license from
Dolby Laboratories Licensing
Corporation. Additionally licensed
under Canadian patent number
1,037,877. "Dolby," the double-D
symbol □□ and "Pro Logic" are
trademarks of Dolby Laboratories
Licensing Corporation.
RK-74A (not supplied)
Line input
Amplifier with Dolby*
Pro Logic decoder
Rear
speaker (L)
18
Rear
speaker(R)
Front
Front
speaker (L)
speaker(R)