Using the s-link function with a sony av receiver – Sony KP-61XBR200 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing and Connecting the Projection TV (continued)
Disconnect all power sources before making any connections.
Using the S-Link function with a
Sony AV receiver
1 Using VIDEO connector, connect VIDEO
1 IN on your projection TV to MONITOR
VIDEO OUT on your Sony AV receiver.
2 Using AUDIO/VIDEO connectors,
connect SELECT OUT on your projection
TV to TV AUDIO and VIDEO IN on your
receiver.
3 Using an S-LINK connector, connect S-
LINK on VIDEO 1 IN on your projection
TV and S-LINK on MONITOR OUT on
your AV receiver.
4 Using an S-LINK connector, connect
projection TV's S-LINK on SELECT OUT
to S-LINK on TV IN on your AV receiver.
5 Using AUDIO/VIDEO and S-LINK
connectors, connect your Sony video
equipment to your AV receiver.
6
Use the AUDIO menu to set SPEAKER to
ALL OFF or CENTER IN. (see
"SPEAKER" on page 38)
7 Use the SET UP menu to set SELECT
OUT to TV OUT. (see "SELECT OUT" on
page 48)
20