A using the audio menu, To select the audio «a menu, To restore the factory settings – Sony KP-61XBR200 User Manual
Page 42: Using the audio menu, Adjusting your set up (menus) (continued)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjusting Your SET UP (menus) (continued)
•A Using the AUDIO Menu
AUDIO
______
TflEBl f
—-
BASS
•
BALANCE ...................
•
MTS
STEREO
SPEAKER
ALI ON
SURROUND
Of r
SURROUND LEVEL
Move
:•
Select Exit №i*J)
Sliders
For detailed information on using the remote
control to modify menu settings, refer to
"Learning Menu Selection" on page 34.
To select the AUDIO «A menu:
Display Highlight
Select
%
To restore the factory settings
Press RESET on the remote control while the
AUDIO menu is selected.
TREBLE
Sounu
Adjust slider right (up) to increase high pitched sounds.
Adjust slider left (down) to decrease high pitched sounds.
BASS
Sound Adjustment
Adjust slider right (up) to increase low pitched sounds.
Adjust slider left (down) to decrease low pitched sounds.
BALANCE
Sound Adjustment
Adjust slider right (up) to emphasize right speaker volume.
Adjust slider left (down) to emphasize left speaker volume.
"*MTS
Enjoy stereo,
bilingual and mono
programs.
STEREO: Select for stereo reception when viewing a program broadcast in
stereo.
SAP: Select to listen to a bilingual broadcast. (non-SAP programs will be muted
when this feature is selected)
MONO: Select for mono reception, (use to reduce noise during stereo
broadcasts)
Quick MTS access: Press MTS on your remote control to cycle through the
MTS options as follows: (STEREO * SAP ♦ MONO ♦ STEREO)
SPEAKER
Custom selection
of audio output
source.
ALL ON: Select to listen to the sound from the projection TV speakers alone.
L/R OFF: Select to turn off the projection TV left and right speakers and listen to
the left and right channel sounds through a separate audio system’s
speakers.
ALL OFF: Select to turn off the projection TV speakers and listen to the
projection TV’s sound only through an external audio system’s speakers.
CENTER IN: Select to use the projection TV center speaker as center speaker
when you connect an amplifier with Dolby Pro Logic decoder, (see
“Connecting an amplifier with Dolby Pro Logic decoder’’ on page 18)
38