Know your router tablé – Craftsman 320. 28180 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
KNOW YOUR ROUTER TABLÉ
Your router table has a precision-built electric switch box and it should be con
nected to only a 120-volt, 60-HZ AC power supply (normal household current).
DO NOT operate on direct current (DC). The large voltage drop would cause a
loss of power and the motor would overheat. If the router table does not oper
ate when plugged Into correct 120-volt, 60-HZ AC ONLY outlet, check the power
supply. The router table comes with an 8~ft. power cord (no adapter needed).
1. Oversized table (14-1 /8” x 23-5/8”) for a large, smooth, durable, work sur
face and improved sound absorption. Table height clearance is 11-1/4 in. to
accommodate most fixed and plunge-based routers
2. Integrated safety switch with two outlets. Single-socket capacity is 15 Amps,
total capacity is 20 Amps.
3. Extended fence provides maximum work piece support; the fence can be
moved forward and backward 3-3/4 inch.
4. Infeed and outfeed fence can each be extended 2 in.
5. Outfeed fence can be adjusted as much as 9/16-in. forward of the infeed
fence for joining operations.
6. Vacuum adapter fits a 2-1/2 inch shop vacuum hose.
7. Miter-gauge adjusts from 0“ to 60° in both directions for increased stability in
many difficult feed situations.
8. Fastening holes (11/32-inch dia.) allow the Router Table to be fixed to a
stable work surface.
28180 ManuaLRevised_07C22B
Page 11