Craftsman 486.24504 User Manual

Page 17

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

FOR 1990 AND NEWER MURRAY TRACTORS
WITH A 46 ' DECK

• Tape 46" tempfate onto deck adapter. Mark and then

cut out adapter.

• Fasten the angle bracket and the mounting bracket to

the mower deck as shown in figure 34. Use

tNO

5/16"

X 3/4" carriage bolts, 5/16" fiat washers and 5/16"
lock nuts. The bolt heads go on inside of mower
deck.

• Dril! two 5/16" diameter holes in the deck adapter that

will align with the holes in the angle bracket and the
mounting bracket. Assemble the deck adapter to both
brackets using two 1/4" x 3/4" hex bolts, 1/4" flat
washers, nylon washers and 1/4" hex lock nuts. See
figure 28.

FIGURE28

• Assemble end of hose and hose clamp over the round

opening of deck adapter and tighten clamp.

GO

DIRECTLY TO THE OPERATION INSTRUCTIONS
WHICH ARE LOCATED ON PAGE 18.

17

Advertising