Hanging vac on storage rack (continued), Cord storage, Removing vac from storage rack – Craftsman 113.179255 User Manual
Page 10: Accessories, Hose and extension wand, Storage, Hanging vac on storage rack accessories
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Hanging Vac on Storage Rack (continued)
Cord
Retainer
Cord Storage
When your Clean 'N Carry Wet/Dry Vac is
not in use, it should be unplugged from
the outlet. Excess cord should be
wrapped over the hose storage rack and
around the accessory storage bin.
Several loops may be required to elimi
nate any tripping hazard created by a
loosely hanging cord.
Removing Vac from Storage
Rack
1. Unplug the power cord from the electri
cal outlet. Remove the cord from the
keeper and retainers. Drape the loose
cord over the top of the vac.
2. With your right hand, raise the folding
handle.
3. With your left hand depress the release
tab located on the upper left corner of
the storage rack,
4. Lift up on the handle, and pull the vac
up and out of the storage rack.
Accessories
Hose and Extension Wand
Storage
1. Slide the extension wands on either
side of the Clean 'N Carry vac for stor
age. The storage rack accommodates
both extension wands.
2. Wrap the Pos-I-Lock Hoses around the
upper storage rack as shown.
10