Know your random orbit sander (fig. 2) – Craftsman 172.27673 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
UNPACKING cont.
PARTS LIST (Fig. 1)
1. Sander
2. Cyclonic Dust Box
DESCRIPTION
4, Two 5-in. Hook and Loop
Sanding Discs with Pre-Punched
Holes
5. Operator’s Manual
KNOW YOUR RANDOM ORBIT SANDER (Fig. 2)
NOTE: Before attempting to use your sander, familiarize yourself with all of the
operating features and safety requirements.
Your Professional 5” Random Orbit Sander has a precision-built electric motor and it should
be connected to a 120-volt, 60-Hz AC ONLY power supply (normal household current).
DO NOT operate on direct current (DC). The large voltage drop will cause a loss of power
and the motor will overheat. If the sander does not operate when plugged into correct
120-volt, 60-Hz AC ONLY outlet, check the power supply. This sander has a 10-ft., 2-wire
power cord (no adapter needed).
This Random Orbit Sander has the following features:
1. Powerful 3.0 amp motor provides the torque, power and durability for a variety
of continuous sanding applications.
2. Variable speed 5,000 to 12,000 OPM orbits per minute (no-load speed) is controlled
by variable speed dial. Match with the correct speed and sandpaper grit to the surface
being sanded for either fast material removal or a fine, smooth finish.
3. Random orbital action with 1/1
6
-in. orbit diameter helps to provide a swirl free finish.
4. Ergonomically designed Palm Grip Handle with Molded-in Comfort Grip
for maximum balance, control, gripping comfort and reduced operator fatigue.
5. Precision-tuned counterbalanced system reduces vibration for smooth operation
and less operator fatigue.
11