Craftsman 172.27673 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

ASSEMBLY con.

TO REMOVE AND EMPTY DUST BOX cont.

NOTE: Empty dust box frequently so dust collection system works properly.
For more efficient operation, empty dust box when it is no more than 1/2 fuil

This wiil ailow better airfiow through the box.

WARNING:

Empty dust box before storage to help prevent possible fire

hazard, especiaily when resin coating or linseed oil finishes have been sanded.

ATTACHING VAC HOSE TO THE DUAL DUST PORT ADAPTER (See Fig. 5,5a and 5b)

When sanding for extended periods of time, you can easiiy attach your sander to a vac

hose and wet/dry vac (sold separately).

1. Unplug the sander.

^ WARNING:

Failure to unplug the sander could result in accidental

starting causing possible serious personal injury.

2. Locate two tab connectors on either side of cyclonic dust box and squeeze together.

This disconnects dust box from sander.

3. Slide dust box off sander dust exhaust hole and remove box from sander.

4. Attach the Vac Adapter with Dual Dust Ports to the dust exhaust hole of the sander.

5. Attach either a 1V

4

or

2

V

2

-in vac hose

onto the vac adapter’s dual dust ports

( see Fig. 5a and 5b).

6

. Connect hose to wet/dry vac. Turn

vac on while operating sander.

Advertising