Switch trigger, Hanging/storage hook, Maintenance – Craftsman 315.114073 User Manual

Page 12: Operation

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

OPERATION

SWITCH TRIGGER

See Figure 4.

To turn the light on and off, depress the switch trigger.

SWITCH

HANGING/STORAGE HOOK
See Figure 5.

On top of the housing is a hook which you can use to

hang the light. This is good for storing the light when not

in use and keeping the light out of the reach of children.

To use, simply lift up on the hook.

HANGING /

STORAGE HOOK

Fig. 4

MAINTENANCE

WARNING: When servicing, use only identical

Craftsman replacement parts. Use of any other part
may create a hazard or cause product damage.

WARNING: Always wear safety goggles or safety

glasses with side shields when using compressed
air to clean workiights. If the operation is dusty, also
wear a dust mask.

ASi

WARNING: Do not at any time let brake fluids,
gasoline, petroleum-based products, penetrating
oils, etc. come in contact with plastic parts. Chemi-
cafs can damage, weaken or destroy plastic which
may result in serious personal injury.

Only the parts shown in the parts list are intended to
be repaired or replaced by the customer. Ail other parts

should be replaced at a Sears Service Center.

àk

WARNING: To avoid serious personal injury, always

remove the battery pack from the worklight when

cleaning or performing any maintenance.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most

plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.

Use clean cloths to remove dirt, dust, oil, grease, etc.

12

Advertising