Assembly, Discharge chute, Remove chipper-shredder from carton – Craftsman 247.775860 User Manual
Page 5: Loose parts, Bottle of oil, Figure 1
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ASSEMBLY
Hopper
Discharge Chute
Chipper Chute
IMPORTANT: This unit is shipped without gasoline
or oil in the engine. After assembly, see
OPERATION section of this manual for proper fuel
and engine oil fill-up.
NOTE: To determine right and left hand sides of your
chipper-shredder, stand behind the unit with the
engine farthest away from you.
Your chipper-shredder has been completely assembled
at the factory, except for the hopper assembly, chipper
chute, discharge chute and the catcher bag.
These parts are shipped loose in the carton. A pair of
safety glasses and a bottle of oil are also included in
the carton.
1. REMOVE CHIPPER-SHREDDER
FROM CARTON
•
Cut the corners of the carton.
•
Remove all packing inserts.
•
Remove all loose parts including owner’s
manual. See figure 1.
•
Roll chipper-shredder out of the carton.
•
Make certain all parts and literature have been
removed before the carton is discarded.
2. LOOSE PARTS
a. Hopper Assembly
b. Discharge Chute
c. Chipper Chute
d. Catcher Bag
e. Bottle of Oil
f. Safety Glasses
g. Owner’s Manual (not shown in figure 1)
Safety
Glasses
Catcher Bag
Bottle
of Oil
Figure 1
5