To remove mower, Service and adjustments – Craftsman YS 4500 917.28990 User Manual

Page 24

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SERVICE AND ADJUSTMENTS

WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY

.SERVICE OR ADJUSTMENTS:

Depress brake pedal fully and set parking brake.
Place attachment clutch in “DISENGAGED” position.

Turn ignition key to “STOP” and remove key.

Make sure the blades and all moving parts have completely stopped.
Disconnect spark plug wire from spark plug and place wire where it cannot

come in contact with plug.

TO REMOVE MOWER

2

.

3.

Place attachment clutch in “DISEN­

GAGED” position.

Lower attachment lift lever to its lowest

position.

Disengage belt tension rod (K) from

- lock bracket (L).

A

CAUTION: Belt tension rod is spring

loaded. Have a tight grip on rod and
release slowly.

4. Remove mower belt from electric

clutch pulley (M).

Disconnect front link (E) from mower -
remove retainer spring and washer.

Go to either side of mower and discon­

nect mower suspension arm (A) from

chassis and rear lift link (C) from rear
mower bracket (D) - remove retainer

springs and washers.

5.

6

.

7. Go to other side of mower and discon­

nect the suspension arm and rear lift

. link.

A

CAUTION: After rear lift links are

disconnected, the attachment lift lever will
be spring loaded. Have a tight grip on lift

lever when changing position of the lever.

8. From right side of mower, disconnect

anti-sway bar (S) from right rear mower

bracket (D) - remove retainer spring

and washer and pull mower toward
you until the bar falls from the hole in

bracket.

9. Turn tractor steering wheel to the left

as far as it will go.

10. Slide mower out from under right side

of tractor.

24

Advertising
This manual is related to the following products: