Operation – Craftsman 919.763010 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATION
Know Your High Pressure Washer
R ead this O w ner^s M anual and S afety R uies before
operation of your H igh P ressure
M/as/ier Compare
this illustration with our pressure washer to familiarize
yourseif with the location of various controls and
adjustments. Save this manual for future reference.
PUMP- Develops high pressure.
ENGINE OIL FILL- Place where engine oil is poured.
PRESSURE REGULATOR- Allows you to adjust the
pressure of the outlet stream.
ENGINE RUN/STOP SWITCH- Sets engine in starting
mode for recoil starter — Stops running engine.
RECOIL STARTER- Used for starting the engine
manually.
SPRAY GUN ASSEMBLY- Controls the application of
water onto cleaning surface with trigger device.
PUMP OIL FILL- Port where pump oii is poured and
breather cap is located.
GAS TANK/CAP- Cap is removed and unleaded
gasoline is poured.
CHEMICAL INJECTION TUBE AND FILTER- Mixes
water and detergent in outlet water flow.
HIGH PRESSURE OUTLET- Connection for high pres
sure hose.
CHOKE- Lever used for starting unit.
ON/OFF
SWITCH
KNOB