Operation – Craftsman 919.763500 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATION
Know Your High Pressure Washer
Read this Owner^s Manual and Safety Rules before
operation of your High Pressure Washer Compare
this illustration with our pressure washer to familiarize
yourself with the location of various controls and
adjustments. Save this manual for future reference.
PUMP- Develops high pressure.
OIL FILL- Place where engine oil is poured.
PRESSURE REGULATOR- Allows you to adjust the
pressure of the outlet stream.
ENGINE RUN/STOP SWITCH- Sets engine in starting
mode for recoil starter — Stops running engine.
RECOIL STARTER- Used for starling the engine
manually.
SPRAY GUN ASSEMBLY- Controls the application of
water onto cleaning surface with trigger device.
PUMP OIL FILL- Port where pump oil is poured and
breather cap is located.
GAS TANK/CAP- Cap is removed and unleaded
gasoline is poured.
CHEMICAL INJECTION TUBE AND FILTER- Mixes
water and detergent in outlet water flow.
HIGH PRESSURE OUTLET- Connection for high pres
sure hose.
CHOKE- Lever used for starting unit.
OIL DIP STICK
CHOKE
THROTTLE
CONTROL
LEVER
CHEMICAL GAS CAP
GUN WAND BASKET
ASSEMBLY
MUFFLER
HANDLE
HIGH PRESSURE
HOSE
CHEMICAL
AJUSTMENT
KNOB
WATER HOSE
INLET
HIGH PRESSURE
OUTLET
CHEMICAL INJECTION
TUBE & FILTER