Awarning a, Warning – Craftsman 123.24201 User Manual

Page 47

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

trailer, inspect all of the welds for cracks or failure at least once a year

A

WARNING

A

Improper weld repair will lead to early failure of the trailer struc­

ture and can cause serious injury' or death. Do not repair cracked

or broken welds unless you Iiave the skills and equipment to
make a proper repair If not, have the welds repaired by a certi­

fied welder

I

10.2.3 Trailer CoiiHcction to Tow Vehicle

I0-2.3J Coupler and Ball

The coupler on the trailer connects to the ball attached to the hitch on the tow

vehicle, The coupler, ball and hitch transfer the lowing forces betrveen the

totv vehicle and the trailer Before each lowy coat the ball with a thin layer of

automotive bearing grease to reduce wear and ensure proper operation; and check
the locking device that secures the coupler to the ball for proper operation

ff you see or feel evidence of wear, such as flat spots, deformations, pitting

Oi

corrosion, on the ball or coupler, immediately have y'our dealer inspect them to

determine the proper action to prevent possible failure of the ball and coupler
sysiera All bent or broken coupler parts must be replaced before towing tlie trailer'

The coupler handle lever must be able to rotate freely and automatically snap into

the latched position. Oil the pivot points, sliding surfaces, and spring eirds with

SAE 30W motor oil. Keep the ball pocket and latch mechanism clean Dirt or
contamination can prevent proper operation of the latching mechanism

When replacing a ball, the load rating must match or exceed the GVWR of the

trailer

10.2.4 dack

If a grease fitting is present, you must use a gi ease gun to lubricate the jack

cneci'sanism Grease the gears in the top of hand-cranked jacks once a year; by

removing the top of the jack and pumping or hand packing grease iruo Ute gears

10.2.5 Lights and Signals

Before each tow, check the trailer taiilights, stoplights, turn signals and any

clearance lights for proper operation

A

WARNING

Imjtroper o|jeraling taiilights, stoplights and turn signals can
cause collisions Check all lights before each toW' Failure to

heed this warning could result in property damage, serious injury

and death._______________________________________________

''i---------;—■;—; —^

^

^ ^ ;

47

Advertising