Maintenance, Service and adjustments – Craftsman 358.748260 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Move slowly back and forth over the
material as you vacuum. Avoid forc­
ing the unit into a pile of debris as

this can clog the unit.

Keep the vacuum tube about an inch

above the ground for best results.

A WARNING:

If the unit becomes

clogged, stop the unit and unplug the
extension cord. Wait untii the impeller
has completely stopped turning, then
remove the vacuum tubes. Carefully
reach into the vacuum opening and
clear out the clogged debris.

MAINTENANCE

CUSTOMER RESPONSIBILITIES

A WARNING:

Disconnect power source before performing maintenance.

CARE & MAINTENANCE TASK

WHEN TO PERFORM

Check for loose fasteners and parts

Before each use

Check for damaged or worn parts

Before each use

Inspect and clean unit and labels

After each use

Remove and empty collection bag

After each use

Clean collection bag

Yearly

GENERAL RECOMMENDATIONS

The warranty on this unit does not cover

items that have been subjected to oper­
ator abuse or negligence. To receive full

value from the warranty, the operator

must maintain unit as instructed in this
manual. Various adjustments will need

to be made periodically to properly

maintain your unit.

BEFORE EACH USE

CHECK FOR LOOSE
FASTENERS AND PARTS
• Inlet Cover
• Blower Tube
• Vacuum Tubes
• Collection Bag

CHECK FOR DAMAGED OR

WORN PARTS

Contact your Sears Service Center for
replacement of damaged or worn
parts,

• ON/OFF

Switch - Ensure switch func­

tions properly by moving the switch to
the

OFF

position. Make sure motor

stops; then restart motor and continue.

• Inlet Cover - Discontinue use of unit if

inlet cover fails to latch properly or if it
is damaged in any way.

AFTER EACH USE

INSPECT AND CLEAN UNIT & LABELS
Stop unit and unplug extension cord.
• After each use, inspect complete unit

for loose or damaged parts. Clean
the unit using a damp cloth.

• Wipe off unit with a clean dry cloth.
CLEAN COLLECTION BAG
IMPORTANT:
THE COLLECTION BAG
MUST BE PROPERLY EMPTIED.
• You must properly empty and maintain

the collection bag to avoid deteriora­
tion and obstruction of air flow.

• Remove the collection bag from the

unit and empty after each use. Do not

store bag without emptying the bag of
all contents (grass, leaves, etc.).

• Wash the bag once a year. Remove

the bag from the blower and turn the

bag inside out. Wash the bag with a

water hose. Allow the bag to hang and

dry completely before you reuse the

bag.

SERVICE AND ADJUSTMENTS

HOW TO REMOVE AN OBJECT
FROM THE AIR INTAKE

A WARNING:

Stop the unit and

disconnect from the power source be­

fore opening the iniet cover. The mo­
tor must be stopped and the impeiler

blades no longer turning to avoid seri­

ous injury from the rotating blades.

2

.

10

While holding the inlet cover open,

remove the vacuum tubes. The in­
let cover must be held open

through all remaining steps.

Carefully reach into the vacuum
opening and clear out the air intake
area. Clear all debris from impeller.

Advertising