Nisk ot nursling, Specifications – Craftsman 921.152100 User Manual

Page 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Important Safety Instructions & Guidelines

Risk from

Flying Objects

Always wear ANSI Z87.1 approved safety glasses with side shields when the air
compressor is in use. Turn off the air compressor and drain the air tank before

performing any type of maintenance or disassembly of the hoses or fittings. Never
point any nozzle or sprayer toward any part of the body or at other people or animals.

Risk to Breathing

Avoid using the air compressor in confined areas. Always have adequate space

(12 inches) on all sides of the air compressor. Also keep children, pets, and others out
of the area of operation. This air compressor does not provide breathable air for any­
one or any auxiliary breathing device. Spraying material will always need to be in
another area away from the air compressor to not allow intake air to damage the air

compressor filter.

Risk of

Electrical Shock

Never utilize the air compressor in the rain or wet conditions. Any electrical issues or
repairs should be performed by authorized personnel such as an electrician and

should comply with all national and local electrical codes. The air compressor should
also have the proper three prong grounding plug, correct voltage, and adeguate fuse

protection.

Risk of

Explosion or Fire

Never operate the compressor near combustible materials, gasoline or solvent vapors.
If spraying flammable materials, locate the air compressor at least 20 feet away from

the spray area. Never operate the air compressor indoors or in a confined area.

niSK OT nursling

Always drain the air compressor tank oaiiy or atter eacn use. It tne tank aeveiops a
leak, then replace the air compressor. Never use the air compressor after a leak has
been found or try to make any modifications to the tank. Never modify the air compres­
sor’s factory settings which control the tank pressure or any other function.

Specifications

Pump

Oil-lube direct drive

Motor induction

1.5 HP Peak

Bore

1.65”

Stroke

1.26”

Voltage Single Phase

120 VAC

Minimum Circuit Requirement 15 Amps
Air Tank Capacity

2 Gallons

Cut-in Pressure

95 PSI

Cut-out Pressure

125 PSI

SCFM @ 90 PSI

2.4

Advertising