Craftsman 315.108340 - Manual (Page 6)

PRODUCT SPECIFICATIONS
Horsepower
Model No. 315,108330
Model No. 315.108340
Input
Model No. 315,108330
Model No. 315.108340
Blade Diameter
2
2-1/4
10 Amperes
12 Amperes
7-1/4 in, (184 mm)
Blade Arbor
Cutting Depth at 0° Bevel Cut
Cutting Depth at 45“ Bevel Cut
Cutting Depth at 51.5° Bevel Cut
Rating
No Load Speed
5/8 in. (16 mm)
2-3/8 in. (60 mm)
1-13/16 in. (46 mm)
1 -5/8 in. (41 mm)
120 volts, 60 Hz, AC
5,000 RPM
UNPACKING
Your circular saw has been shipped completely
assembled except for the blade. Inspect it carefully to
make sure no breakage or damage has occurred
during shipping. If any parts are damaged or missing,
contact your nearest Sears Retail Store to obtain
replacement parts before attempting to operate saw. A
blade, blade wrench, and this owner's manual are also
included.
WARNING: If any parts are missing, do not
operate this tool until the missing parts are
replaced. Failure to do so could result in possible
serious personal injury.
ACCESSORIES
The following recommended accessories are currently available at Sears Retail Stores.
40 Tooth General Purpose Cut-Off Blade
35 Tooth Master Combination Blade
200 Tooth Plywood Blade
18 Tooth Carbide Blade
18 Tooth Mach II Silver Series Carbide Blade
24 Tooth Mach II Silver Series Carbide Blade
24 Tooth Combination Carbide Blade
■ Rip Guide
A WARNING: The use of attachments or accessories not listed might be hazardous.
7-1/4 in.
7-1/4 in.
7-1/4 in.
7-1/4 in.
7-1/4 in.
7-1/4 in.
7-1/4 in.
WARNING:
EIS5IESEI The operation of any circular saw can result in foreign objects being thrown into your
eyes, which can result in severe eye damage. Before beginning power tool operation,
always wear safety goggles or safety glasses with side shields and a full face shield
when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or
standard safety glasses with side shields, available at Sears Retail Stores.
Page 6