Operation – Craftsman 315.115042 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATION
^ WARNING: Your sander should never be
connected to power supply when you are
assembling parts, making adjustments, cleaning, or
when not in use. Disconnecting sander will prevent
accidental starting that could cause serious
personal Injury.
AUXILIARY HANDLE
See Figure 2.
An auxiliary handle Is packed with your sander for ease of
operation and to help prevent loss of control. Any loss of
control could result in an accident, causing possible
serious personal injury.
The motor housings are designed so that the auxiliary
handle can be installed on either side of the unit.
To install:
■ Position washer Into place and start threads into the
threaded hole in the gear housing.
■ Tighten handle securely.
WASHER
AUXlUARY HANDLE
SPINDLE LOCK BUTTON
See Figure 3.
A spindle lock button has been provided for locking the
spindle of your tool in a stationary position. It is located on
the side of the gear housing as shown in figure 3. Depress
and hold the lock button while installing, changing, or
removing accessories,
A CAUTION:
Do not engage spindle lock while spindle
is rotating.
SPINDLE LOCK
BUTTON
Fig. 3
GEAR HOUSING
Fig. 2