Craftsman 315.115042 - Manual (Page 9)

OPERATION
For ease of operation and maintaining proper control, hold
your Sander only by the handles provided, Also, as men­
tioned previously, hold it firmly with both hands at all times.
Never grasp the fror* or sides of the tool body, or by any
other means during use.
^ WARNING; This tool has been designed for hand
held use only. To prevent possible serious injury,
do not clamp it upside down to a bench and attempt
to use it as a bench tool. It would be impossible to
control and you would have no protection against
dust, sparks, loose particles, etc.
DO NOT AHEMPT TO USE AS A BENCH TOOL
CAUTION: Because of the rotating disc nature of
your tool, always stay constantly aware of the
power cord, cord plug, extension cord and
extension cord plugs. They could get caught in the
rotating spindle, wrap around it, and cause possible
serious injury.
^ WARNING: If you convert your sander to a
grinder, you must purchase the appropriate
grinding wheel and grinding wheel guard. Any
attempt to use this tool as a grinder without a guard
would be misuse and could result in possible
serious injury.
ACCESSORIES
THE FOLLOWING RECOMMENDED ACCESSORIES ARE
CURRENTLY AVAILABLE AT SEARS RETAIL STORES.
7-in. Sanding Kit Item No. ^11157
Aluminum Oxide Sanding Discs
Guard Item No, ®1711
(Available through catalog sales only)
50’ 14 A.W.G. Ext, Cord Item No. 35821
Wire Cup Brush Wheel Item No. 364106
Carrying Case Item No. ®1472C
GrirKlIng Wheel Item No. ®64101
100-14 AW.G. Ext. Cord Item No, ®83508
WARNING: The use of attachments or accessories not listed above might be hazardous.