Know your pressure washer, Features and control – Craftsman 580.752010 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FEATURES AND CONTROL
J
KNOW YOUR PRESSURE WASHER
Read the owner’s manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls
and adjustments. Save this manual for future reference.
Automatic Cool Down System — Cycles water
through pump when water reaches 125°-155°F. Warm
water will discharge from pump onto ground. This
system prevents internal pump damage.
Detergent Pick-Up Tube and Filter - Used to siphon
detergent from chemical bottle to the low pressure
water stream.
Fuel Cap - Fill fuel tank with regular unleaded fuel here.
High Pressure Hose (not shown) - Connect one end
to the spray gun and other end to the high pressure
outlet.
High Pressure Outlet — Connection for high pressure
hose.
Nozzle Extension with Quick Connect (not shown)
— Allows you to switch between four different nozzles.
filling instructions.
Primer Bulb — Prepares a cold engine for starting.
Pump — Develops high water pressure.
Recoil Starter — Used for starting the engine
manually.
Spray Gun (not shown) - Controls the application of
water onto cleaning surface with trigger device.
Includes trigger lock.
Spray Tips (not shown) — Chemical injection, 0°,
15°, and 40°: for various high pressure cleaning
applications.
Throttle Control Lever - Sets engine in starting
mode for recoil starter and stops running engine.
Water Inlet — Connection for garden hose.